Stkm16C Auto Part Steel Pipe The material of this kind of steel is medium carbon structural steel, which has good cold and hot working properties, good mechanical propertie, wide source and low price , so they are widely used. Its biggest weakness is low hardenability, and workpieces with large cross-sectional dimensions and relatively high requirements should not be used. Widely used in machinery, without heat treatment: HB≤229; heat treatment: normalizing; impact energy: Aku≥39J; high strength, good plasticity and toughness, 45# steel plate after quenching and before tempering, the hardness is greater than HRC55 (the highest possible Up to HRC62) is qualified, after heat treatment, and then tempering can reach HRC42-46, which can not only ensure its good mechanical properties, but also obtain the hardness requirements of the surface, used to make small cross-section quenched and tempered parts and Large normalized parts with less stress, and surface quenched parts that do not require high core strength, such as pins, guide posts, watch hands and other components.
Product Name
|
Stkm16C Auto Part Steel Pipe
|
Material
|
GB:45#
AISI/ASTM:1045
JIS:S45C
DIN:1.1191 C45E/CK45
ISO:C45E4
|
Technology
|
Hot Rolled ,Cold Rolled,Cold Drawn,Hot Expended
|
Tolerance
|
Control with in the standard, OD:+/-1%, WT:+/-5%
|
Chemical Composition
|
C:0.42-0.5%
Si:0.17-0.37%
Mn:0.5-0.8%
P:≤0.035%
S:≤0.035%
Cr:≤0.25%
Ni:≤0.25%
|
Mechanical Property
|
Yield Strength (MPa)≥:355
Tensile Strength (MPa):≥600
Elongation %≥:16
|
Application
|
Shock Absorber, motorcycle exhaust, auto industry, hydraulic buffer, hydraulic cylinder, fork spring, oil drilling, etc.
|
Payment Terms
|
1.FOB 30%T/T,70% Before shipment
2.CIF 30% Pre-payment , Balance must be paid before shipment
3.Irrevocable 100% L/C at sight
|
Third Party Inspection
|
SGS ,BV, MTC
|
Advantages
|
1.Short delivery time
2.Quality assurance
3.Competitive price,
4.Free Sample
|
Delivery Time
|
Within 25 days after receipt of advance payment
|
Production Show:
Productieproces:
1. The main production process of hot-rolled seamless steel pipe (main inspection process):
Tube blank preparation and inspection→tube blank heating→piercing→tube rolling→steel reheating→fixed (reduced) diameter→heat treatment △→finished tube straightening→finishing→inspection (non-destructive, physical and chemical, Taiwan inspection)→warehousing
2. The main production process of cold-rolled (drawn) seamless steel pipes:
Billet preparation→pickling lubrication→cold rolling (drawing)→heat treatment→straightening→finishing→inspection
Applictie:
Our products aye widely used in water engineering,petrochemical industry,chemical industry,electric power industry,agricultural irrigation,urban construction.
Used for liquid conveying:water supply and drainage.For gas transport:gas,steam,liquefier petroleum gas.
For structural use:as pile pipe,as a bridge;Pipes for wharves,roads and building structures.
Verpakking en verzending:
FAQ:
Q: Are you a manufacturer?
A: Yes , we are a seamless steel pipe manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting hot rolled seamless steel pipe,cold rolled seamless steel pipe,cold drawn seamless steel pipe and alloy seamless steel pipe etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers' benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Contact Now
